01 · VALIDATION
RobiLab Basic馬達驅動基本驗證
Voltage, current, RPM, load behavior, board temperature rise and early bring-up review. Supports RobiDev Gen.1 evaluation.電壓、電流、轉速、負載行為、板級溫升與初期啟動檢視，支援 RobiDev Gen.1 評估。
View platform查看對應平台ROBILAB · MEASUREMENT & SYSTEM VALIDATION
Measure the system. Make the next decision.量測真實系統，推進下一個決策。
Engineering validation for motor drives, UAV propulsion, robotic actuators and thermal paths.支援馬達驅動、無人機推進、機器人致動與熱路徑的工程驗證。
FROM ASSUMPTION TO EVIDENCE · 從假設到實證
The measurement layer of RobiChip.羅比芯平台的量測驗證層。
Capture voltage, current, speed, thrust, torque and temperature under defined conditions. Relate board behavior to the complete system, then turn the findings into a reviewable engineering report.在明確條件下量測電壓、電流、轉速、推力、轉矩與溫度；將板級行為對照系統表現，再轉化為可審查的工程報告。
FOUR SERVICE PACKAGES · 四項驗證服務
Choose the question to validate.從要驗證的工程問題開始。
Each engagement defines the test objective, sample preparation and expected evidence before work begins.每次合作先定義測試目標、樣品準備與預期證據，再進行量測。
02 · VALIDATION
RobiLab Propulsion推進系統驗證
Thrust, RPM, input power, gf/W, motor–driver–propeller matching and thermal observation. Supports RobiThrust validation.推力、轉速、輸入功率、gf/W、馬達與驅動器及螺旋槳匹配、熱觀察，支援 RobiThrust 驗證。
View platform查看對應平台03 · VALIDATION
RobiLab Actuator致動器驗證
Dynamic load, T–N / torque–speed curves, thermal response and control-interface review. Supports RobiTorque pilots.動態負載、T–N 轉矩—轉速曲線、熱響應與控制介面檢視，支援 RobiTorque pilot 驗證。
View platform查看對應平台04 · VALIDATION
RobiLab Thermal熱路徑與系統散熱檢視
Temperature rise, hotspots, cooling conditions and package-to-system thermal review, with RobiFlux / RobiAgent workflow linkage.溫升、熱點、冷卻條件與封裝至系統熱路徑檢視，銜接 RobiFlux／RobiAgent 工程流程。
View platform查看對應平台ROBIAGENT → ROBILAB → DESIGN-IN
Prepare, measure, review.整理需求、實體量測、工程審查。
RobiAgent supports technical questions, thermal pre-checks and layout review. RobiLab tests the assumptions; measured evidence then supports RobiDev evaluation, RobiThrust validation, RobiTorque pilots and RobiSoC Design-in.RobiAgent 協助技術問題整理、熱預評估與 layout 檢視；RobiLab 實測工程假設，將證據回饋至 RobiDev、RobiThrust、RobiTorque 與 RobiSoC。
- 01
Requirement需求定義
Motor, load, voltage, target and constraints.馬達、負載、電壓、目標與限制。
- 02
Test setup測試建置
Fixture, RobiDev, sensors and power source.治具、RobiDev、感測器與電源。
- 03
Data capture資料擷取
Current, voltage, RPM, thrust and torque.電流、電壓、轉速、推力與轉矩。
- 04
Thermal review熱行為檢視
Temperature rise, hotspots and cooling conditions.溫升、熱點與冷卻條件。
- 05
Engineering report工程報告
Test conditions, observations, data and limits.測試條件、觀察、數據與限制。
- 06
Recommendation導入建議
Next tests, design changes and RobiSoC mapping.後續測試、設計調整與 RobiSoC 導入對應。
REPORT DELIVERABLES · 報告交付
Data with its context intact.數據與測試脈絡，一併交付。
Setup definition測試條件
Motor / propeller / actuator, voltage, load profile, fixture, sensors, cooling and objective.馬達／螺旋槳／致動器、電壓、負載曲線、治具、感測器、冷卻條件與測試目標。
Captured results量測結果
Voltage, current, RPM, thrust, torque, power, temperature, efficiency indicators and time-domain observations.電壓、電流、轉速、推力、轉矩、功率、溫度、效率指標與時域觀察。
Engineering findings工程發現
Thermal behavior, load response, operating limits, motor–driver matching, system trade-offs and risk items.熱行為、負載響應、操作限制、馬達驅動匹配、系統取捨與風險項目。
Next-step actions後續行動
Follow-up tests, cooling or layout changes, RobiAgent pre-checks, RobiSoC mapping and pilot planning.後續測試、冷卻或佈局調整、RobiAgent 預評估、RobiSoC 導入與 pilot 規劃。
Engineering validation and Design-in support. Results apply to the agreed test conditions; certification, production qualification and field performance require their own validation scope.定位為工程驗證與設計導入支援；結果適用於約定測試條件，正式認證、量產資格與場域表現須另訂驗證範圍。
CALIBRATION-AWARE VALIDATION · ROADMAP
Bring simulation closer to measurement.縮小模擬與實測之間的落差。
Structured measurements can inform simulation boundary conditions, thermal-path assumptions, contact resistance, convection, power loss and load profiles. The direction is to support customer CAE / DOE workflows with application-specific validation data.結構化量測資料可協助檢視模擬邊界、熱路徑假設、接觸熱阻、對流、功率損耗與負載曲線，以應用驗證資料支援客戶既有 CAE／DOE 流程。
Simulation-to-measurement correlation is a project-based roadmap direction, not a standard online service or a claim of certified third-party CAE integration.模擬與量測校準屬專案型路線規劃，目前並非標準線上服務，亦不代表取得第三方 CAE 官方整合或認證。
START A DESIGN-IN CONVERSATION · 開始設計導入
Define your next validation question.界定下一個需要實測的問題。
Start with the system, constraint or validation question. RobiChip will help identify the useful scope before a case is opened.從系統、限制條件或驗證問題開始；案件啟動前，先界定最有效的合作範圍。